Carbon Steel Piping

Carbon Steel Piping

With our dedicated Carbon Steel fabrication facility, recently extended to 3,500 Sq. Mtrs. c/w 8 overhead gantries, Radley Engineering offers the highest quality in design and manufacturer of Carbon Steel piping fabrication to our clients, including Amgen, Regeneron, BMS, MSD, Glanbia, Genzyme and Alexion

Our Carbon Steel services include:

  • Dual certified welder qualifications and procedures
  • Capable of fabricating 1/8″ and upwards
  • Automated pipe cutting
  • Automated & semi-automated pipe welding
  • NDT facility on site
  • Pre-dispatch In house inspection & Cleaning team
  • Designated areas for 3rd party/FAT inspections
  • Full Roland labelling service is available in house for pipeline identification to the client’s specifications.

The Carbon Steel workshop has a dedicated team of qualified fitters and coded welders backed up by a quality team and systems that insure the final fabrication meets all the codes and standards required by the client.

Radley Engineering have built a network of respected world leading Consultant Engineers including Project Management, Jacobs Engineering, Fluor Eng, as well as our sub-contractor supply chain who have added to our success in delivering quality work.


Carbon steel is steel in which the main interstitial alloying constituent is carbon in the range of 0.12–2.0%.

Carbon Steel is broken down into four classes based on the carbon content: –

  • Low Carbon Steel Up to 0.3% Carbon Content
  • Medium Carbon Steel Between 0.3% – 0.6% Carbon Content
  • High Carbon Steel Between 0.6% – 1.0% Carbon Content
  • Ultra-High Carbon Steel Between 1.2% – 2.0% Carbon Content

As the carbon percentage content rises, steel has the ability to become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces weldability. In carbon steels, the higher carbon content lowers the melting point.

Shot Blasting/Painting – Carbon Steel

Radley Engineering has a dedicated 170 Sq. Mtr shot blasting and painting facility using the latest blasting equipment. Our state of the art shot blasting facility is fully equipped with a recovery system and calibrated surface profile measuring equipment.

The in-house painting is NACE (National Association of Corrosion Engineers) certified – level 2 inspector – level 3 contractor. The painting procedure qualifies to NORSOKM-51.

Our calibrated surface profile measuring equipment is used to measure the profile of a surface in order to ensure the right volume of coating is used.  This measurement process controls the coating process, avoiding excessive paint and insufficient adhesion. Insufficient adhesion can lead to certain areas remaining uncovered, leading to rust spots.

Contact Radley Engineering Today to Discuss your Carbon Steel Piping Needs.


Bio Pharmaceutical Vessel

Pharma & Bio Pharma

Petrochemical plant

Oil & Gas

Industrial Manufacturing

Power Generation

Power Generation & Utilities